Remove Barrel Lock From Upvc Door

As you do so the cam will line up with the rest of the lock and you will be able to slide the cylinder out towards yourself.

Remove barrel lock from upvc door.

The head of the screw should be visible under the latch on edge of door. Open the door insert key to unlock and open the door. Test the lock by turning the key both right and left a few times and gently tug on the key when it is turned to both. The gearbox is an essential part of the locking mechanism found in the door.

This will tighten the loose door handle and if done correctly your upvc door should be locking correctly and working again with no issues. To do this you need to drill through the barrel directly under the key hole using an 8mm steel drill bit drilling a pilot hole is recomended first. By removing these screws you may be able to remove the lock and open the door. Pull out the cylinder turn the key while apply slight pressure to the opposite end of the cylinder.

The method of lock snapping how burglars snap the. As your key is stuck the barrel will have to be drilled out. Remove fixing bolt cylinder is held in place by a long threaded bolt screw. Step 2 take the door off its hinges.

This will drill through the retaining lug hence the barrel will now come out. The key should be left in the lock. So all you would need to do is find the screw that holds the barrel of the lock in place and tighten it. Use a hammer and center punch to drive out the hinge pins if they are accessible.

How to change a upvc door lock. If you ever wondered how to change your front or back door locks in this short video we ll show you how to remove and replace a eurocylinder or euro profil. Once the door is no longer connected to the frame you ll be able to slip it out of the opening and remove the lock from the interior side. Lock snapping topics we will cover on this page are.